After struggling to like the original installation of my a/c seawater pump and reviewing literature, such as the one from Dometic installation manual (https://www.dometic.com/en-us/us/produc ... umentation) - picture reproduced below, I decided to do something about it.
I had the following opportunities to improve hull to a/c seawater pump:
1) An avoidable 90deg elbow fitting,
2) Hoses had kinks (wrinkles)
3) One of the hose2thread fitting was made of PVC
4) Hose diameter from strainer to pump smaller than pump inlet
5) Hose could be more robust
This is the result:
How I improved my a/c cooling water installation
How I improved my a/c cooling water installation
You do not have the required permissions to view the files attached to this post.
2018 Bavaria R40 Coupe, D6-370
2015 Regal 35 Sport Coupe, D3-220 - Sold
2015 Regal 35 Sport Coupe, D3-220 - Sold
-
- Posts: 6
- Joined: Mon Mar 04, 2019 4:06 pm
Re: How I improved my a/c cooling water installation
please install a ball valve between the streiner and pump to avoid air in the system when cleaning the strainer